Mac OS F4V Convert

Are you still looking for a good solution to share JVC TOD camcorder videos with your friends or family on your QuickTime Player? Although QuickTime Player can not read TOD files now, you can use a third party which can help you play JVC TOD files on it. Here I would rather share with you a stable and easy-to-use TOD Converter-Moyea TOD Converter for Mac. This TOD Converter for Mac is powerful to convert and edit TOD to MOV (QuickTime) with perfect output quality. For its friendly interface, everyone can easily operate it. And for its high video compressing, users could easily store TOD files in a smaller size.

Okay, now I will show you the detailed instruction about converting and editing TOD to QuickTime.

Preparation: Free download Moyea TOD Converter for Mac here, install and run it.

Step 1: Add TOD files into this TOD Converter, set out settings

Click the “Add” button to load TOD files you want to convert, and then select the output format as MOV from the drop-down list “Format” as well as set the destination folder from the “Browse”. If not, the output files will be saved in the default folder automatically.

Step 2: Set advanced settings

Click the “Setting” button on the main interface. A profile will pop, and then you can set the aspect ratio, resolution, bitrate, framerate, codec, size, etc as below for your reference. Hit “Save as” to save your settings about profile so that you can use the setting next time without reset it again.

Step 3: Edit the TOD files

Click the “Edit” button on the main interface. An editing window will pop, and then you can edit the TOD files from the button or bar on it. For example, you can click the “Effect” button to adjust brightness; contrast and saturation as well as tick the “Deinterlacing” checkbox to remove interlace to get better image effect.

Step 4: Click the “Convert” button to start converting. Under the conversion process window, you can view the detailed information about Time elapse, estimated left, Generated size and estimated size.

Once the whole conversion is done, you can open the destination folder to get the converted files and then put them on your QuickTime player for enjoying.

Hope this Mac TOD Converter helps!

Convert Blu-ray and DVD to Google Nexus One with subtitle and audio track

Better than iPhone and Droid, Google Phone Nexus One has a 3.7-inch wide WVGA AMOLED touch screen and runs on Android OS with a resolution 800 x480. Built in Bluetooth and a A-GPS receiver are one of the few options on the Nexus One. Standby time on the Nexus One is up to 290 hours on 2G and 250 hours on a 3G. But, there is a problem. Google Nexus One doesn’t directly play Blu-ray and DVD. Have you been dreaming to play Blu-ray and DVD movies on Nexus One?

Okay, I’ll share with you my solution to put and play Blu-ray and DVD on my Nexus One here. The tool I use is called Moyea Blu-ray Video Converter Ultimate, which is equivalent to those three tools: Blu-ray Ripper, Video Converter, and DVD Ripper.

Ready? Here we go.

Step 1: Download Moyea Blu-ray Video Converter Ultimate here, install and run it

Step 2: Load your Blu-ray or DVD files into it.

Step 3: Select output format for Nexus One

Hint: Click the “Subtitle” and “Audio” drop-down list, it supports converting Blu-ray and DVD with subtitle and audio track you like. In fact, this option is one of the most outstanding features of Moyea Blu-ray Video Converter Ultimate.

Step 4: Adjust audio/video parameters

Click the “Settings” button, it is allowed to set bit rate, size, codec, aspect ratio, resolution, channels and so on for your reference. Please the larger bit rate, the bigger file size maintaining the better quality.

Step 5: Edit Blu-ray or DVD

Click the “Edit” button, it offers some optional edit functions to make your Blu-ray and DVD perfect, such as crop, trim, add watermark/effect, replace audio and so on.

Step 6: Start Blu-ray and DVD to Nexus One conversion

Well, to put and play Blu-ray and DVD on Google Nexus One is not hard. Just enjoy it.

Good luck!

Moyea Blu-Ray Video Converter Ultimate begins to support decrypting MKB v12 or higher protection

After adding the feature of ripping subtitles from BDs, Moyea Inc unveiled that Moyea Blu-Ray Video Converter Ultimate starts to support removing the protection with MKB v12 or above. Superior to its previous features, the newest release launched on 04, March, 2010 will definitely meet the needs of more users. The fast speed of the conversion and easy operation has been marveled at. Freely download this software and users will get their desired Blu-ray videos on popular mobiles or tablets such as Archos, Google Nuxus One, HTC Hero, iPad, Blackberry, and so on.

With this Blu-ray video converter, you are free to get videos in various user-generated formats, including AVI, 3GP, MP4, FLV, MOV, MKV, WMV, WMA, OGG, MP3, FLAC, SWF, etc for different players. For example, only after setting the output format as FLV or F4V, you will enjoy comedies or tragedies based on your interest on Youtube. com with ease.

Other than its basic function of ripping BDs, it enables users to edit Blu-ray files so as to get their wishful video effects. The editing capacity includes trimming, cropping, adding watermarks, replacing audio tracks and streams, revolution settings, and so on.

Its built-in Dolby TrueHD and audio-video synchronization technology plays a significant role in keeping the high resolution display and eliminating the annoying audio stuttering or halfway stop issues.

Last but not least, this BD Converter works very well with Windows operating system, including Windows 2000/XP, Vista and Windows 7. Moreover, it supports Adobe Flash Player, QuickTime Player, Windows Media Player 9.0 or above.

Despite of more functions being added, the price of software does not change and it is available from Moyea’s website for only $65.00 (USD).

One method of playing rmvb on Windows 7 Media Player
“The system of my computer is Windows 7 Ultimate. I got some old interesting movies in the format of rmvb from my friends last week. When I tried to play these movies with Windows 7 Media Player, it didn’t work. The system said it could not play rmvb files. How to make it if I want to play rmvb files on Windows 7 Media Player?”
Have you got the same items like me? As we know, each media player has its own limit, which can only play a limited range of video/audio formats. Windows 7 Media Player doesn’t contain rmvb codec so it can not play rmvb files directly. Of course, there are several methods to solve it. For example, you can download rmvb codec to encode it, or try another workable media player.
Here I prefer to share with you my solution to play rmvb on Windows 7 Media Player in a sample way – converting rmvb to Windows 7 Media Player with Moyea Video Converter. The most important reason of choosing it is to enjoy almost all video/audio formats on Windows 7 Media Player without installing different kinds of media players, for Moyea Video Converter is powerful to convert among almost video/audio formats with ease.
Preparation: Free download Moyea Video Converter here, install and run it.
Step 1: Click the “Add” button to import rmvb files into this program
Step 2: Select output format

Tips: Check the device you use to choose output format for your reference in a short time. Right-click the mouse, you can choose Check All, Uncheck All, Expand All and Contract All easily and quickly.
Step 3: Set advanced settings
Click the “Settings” button, a profile window will pop up. Under it, you can set bit rate, frame rate, codec, and size of Video as well as size, codec, channels, and sample rate of Audio for your reference. Remember the larger bit rate, the better quality while the bigger file size.

Tip: Hit the “Save as” button, you can save the settings for next use by default.
Step 4: Click the “Convert” button to start rmvb conversion
After all the necessary settings, you will get the converted video files from its destination folder by clicking the “Open” button within minimum of time.
That’s all. Hopefully the article will give you a favor to a certain extent.

Best way to play Blu-ray on Windows 7 laptop
I had a nice library of DVD’s on my hard drive and wanted to add my Blu-ray’s now. When I put my Blu-ray movie in the built in Blu-ray player on my computer running Windows 7 Pro 64 bit OS.
The error message said: “Windows Media Player cannot play the DVD. The disc was created in a manner that the player does not support.” There was a tab for “Web Help” so I hit it and got a lot of nothing from Microsoft.
In order to solve it, I did some reach online and finally found out a comprehensive tool – Moyea Blu-ray Ripper which is designed to decrypt, copy and convert Blu-ray to other popular video/audio formats. According to my own experience, it is convenient to play Blu-ray movies on Windows 7 without additional tools.
Here I will share the way to play Blu-ray on Windows 7 laptop.
Preparation: Free download Moyea Blu-ray Ripper here, install and run it.
Step 1: Click “DVD ROM” button to add Blu-Ray disc via your Blu-ray drive, or click “DVD Folder” button to add Blu-Ray files from your computer.
Step 2: Select output format you need
Click the drop-down list “Format”, you can easily choose output format you need. Or you can click the “Customize” button to open the profile manager window. Beneath it, you can check the categories you need according to your devices and then select output for your reference.

In addition, you can click the “View Mode” button to switch the mode you like. All the procedure will be done in a short time.
Step 3: Click the “Convert” button to start Blu-ray conversion
Once all the settings are done, you will get the converted Blu-ray files with several minutes from the destination folder and then you could add them on your hard drive or play them on your media player.
That’s all. If there is another easier method to play Blu-ray movies on Windows 7, just share with us.

Backup Blu-ray movies with selective subtitle on Mac OS X
Once you have a mountain of DVD or Blu-ray movies, you may want to copy them for storage. After all, DVD disc and Blu-ray disc are easily damaged. Frequent use of the discs can also cause the loss of quality. Now, with Moyea Blu-ray Ripper for Mac, you can copy or backup your DVD and Blu-ray movies with good quality on Mac. What’s more, it supports decrypting and copying Blu-ray movies with your desired subtitle for greater enjoyment.
Necessary tools: a Blu-ray drive and Moyea Blu-ray Ripper for Mac
After launching this Mac Blu-ray Ripper, you can follow the steps to copy/backup DVD and Blu-ray movies.
Step 1: Click “DVD Rom” button to add Blu-Ray disc via your Blu-ray drive, or click “DVD Folder” button to add Blu-Ray files from your computer.
Step 2: Select certain subtitle language you need from the “Subtitle” button

http://zyghrz.com/pic/1/2/3/mac-subtitle.jpg
Step 3: Choose copy – directly copy category
Click the drop-down list “Format”, you can easily choose the copy option as below:

http://zyghrz.com/pic/1/copy-mac.jpg
Step 4: Click the “Convert” button to start Blu-ray decryption and conversion
After all the procedures, you will get the video files from the destination and then you can backup Blu-ray on your hard drive or other removable medium devices.
All the best!

Convert/rip Blu-ray and DVD movies with selective subtitles on Mac

After collecting a ton of Blu-ray DVD movies, you may want to copy/backup them on your hard drive or other medium for storage, or just want to watch these Blu-ray on your iPod, iPhone, PSP, Zune, Zen, Archos, BlackBerry, iRiver, cell phone, etc without time and geographical constraints, or attempt to edit BD on other editing software for your reference…
Now with Moyea Blu-ray Ripper for Mac, all the process can be easily solved on Mac provided that you have a Blu-ray drive. The new upgraded version of Moyea Blu-ray Ripper for Mac enables users to convert and rip Blu-ray movies with selective subtitles, and it can prevent any audio/video async problem.
Still follow us? Great, the following article will show you my solution to convert/rip Blu-ray with subtitles via this all-in-one Mac Blu-ray Ripper.
Step 1: Load Blu-ray and DVD files into this program via your Blu-ray drive
Step 2: Select the right subtitle language
From the drop-down list “Subtitle”, you can choose the right subtitle language you need with ease. For example, if the Blu-ray has four languages like English, Francais, Deutsch and Nederlar, you can choose the subtitle language from one of them to suit your need.

Step 3: Select output format and set destination folder
Click the drop-down list “Format”, it is allowed you to choose the proper output format from its format categories which contain a large range of video/audio formats to the point of user’s view. Here I just select output format as MKV format for an example as below:
Tips:
Tick the checkbox “Merge into one file”, you can join/combine several Blu-ray files into a single one after converting.
Step 4: Set advanced settings
Click the “Settings” button, a profile will pop up. Beneath it, you can set resolution, aspect of ratio, size, frame rate, codec of Video as well as set size, sample rate, codec and channels of Audio for your reference.
Step 5: Click the “Convert” button to start Blu-ray conversion
Once all the settings are done, you will get the converted files by clicking the “Open” button within several minutes. Then, you can put the video files with subtitle on your media player or portable device for viewing.
For this Mac Blu-ray Ripper is a good timesaver, all the process will be done in a short time.
That’s all. Hope you have a good experience!

Keep video with 5.1 channels on Xbox 360
Are you still frustrated at how to watch videos on Xbox 360 with 5.1 channels around? The tutorial will show you a reliable method of converting video to Xbox 360 with 5.1 channels through Moyea Video Converter.
First of all, let’s view Moyea Video Converter. This video converter is specially designed to convert among almost video/audio formats at high fast conversion and perfect output quality. What’s more, its advanced audio and video sync technology can prevent any audio out of video issue. Additionally, the new version of it allows users to convert video to WMV with 5.1 channels or 7.1 channels.
Preparation: Free download Moyea Video Converter here, install and run it.
Step 1: Load video files into this program
Step 2: Select output format for Xbox 360
After all video files loaded, it is allowed you to choose the proper output format compatible with your Xbox 360 as below:

Tips: If you want to take the minimum of time to select your desired video format, just click the “Customize” button to open the profile manager window and then check the video categories you need. As for those you unwanted video categories, they will be hidden as below:
Step 3: Set audio format with 5.1 channels
Click the “Settings” button, a profile window will pop up as below:
Beneath it, you can set audio/video parameters for your reference. Here I just want to set channels as 5.1.
Step 4: Start conversion by clicking the “Convert” button
Once all the settings are done, you will get the converted video files from its default folder. Then you can put them on your Xbox 360 for viewing like me.

That’s all. Hope it helps!

Transfer/convert TiVo to iPhone, iPhone 3G by entering the Media Access Key
Have you though of converting TiVo files to iPhone, iPhone 3G for watching by entering the Media Access Key for your TiVo without installing the TiVo Desktop software? Congratulations! The following article will show you an easy solution to transfer and convert TiVo with only one tool – Moyea TiVo Converter. This TiVo tool is available to convert TiVo to iPhone, iPhone 3G or other media devices for viewing without additional tools like the TiVo Desktop software, for Moyea TiVo Converter itself supports transferring TiVo files by entering the Media Access Key for your TiVo.
Preparation: Free download Moyea TiVo Converter here, install and run it.
Step 1: Load TiVo files into this program
Click the “Option” button on the main interface, a window will pop up. Beneath it click the “TiVo” button to enter the Media Access Key. After that, you can click the “Add” button to load your TiVo files to this TiVo converter.

Step 2: Select output format and set destination folder
Click the “Format” button to select the output format for iPhone, iPhone 3G/3GS. Beneath the profile window, you can click the “Customize” button to open the profile manager window and then to make your own video format profile by tick the profile categories you usually need. The most merit of it is that those you unwanted format categories will be hidden so that you choose output format next time easier and faster. To users’ point, it is really a good timesaver.

Additionally, click the “View Mode” button, it is allowed you to change the format view mode easily as below:

Step 3: Click “Start” button to start the TiVo to iPhone conversion.
After running, you can drag the converted iPhone MP4 video files to iTunes and then sync to your iPhone. Now the mission of TiVo to iPhone conversion is completed.
That’s all. Hope it helps!

One method of converting flash video to DVD
When surfing online, I found some people have the puzzle about how to convert flash video to DVD. Here I will share with you an easy way to convert flash video to DVD according to my own experience. And the flash video converter I recommended is Moyea FLV Converter, which is powerful to convert flash video to DVD, MKV, WMV, MOV, VOB, 3GP, MP4, MPEG, MPG, ASF, VFW, MP3, AC3, AAC, FLAC or other popular video/audio formats at high fast conversion speed and excellent output quality.
Additionally, the flash video converter supports you convert several flash video files in batch without losing output quality.
Ready? Let’s follow the specific steps.
Step 1: Free download Moyea FLV Converter here, install and run it.
Step 2: Click the “Add” button to load FLV files into it.
Step 3: Select output format as DVD from the drop-down list “Format”
Step 4: Adjust audio/video parameters by clicking the “Settings” button
Step 5: Click the “Convert” button to start FLV to DVD Conversion
After all the necessary settings, you will get the DVD files from its default folder and then you can make full use of it for your own purpose.
Tips:
1) Tick the checkbox “Merge into one file”, you can join;/combine multiple flv files onto a single one.
2) Click the “Edit” button, it is allows you to edit the flv file for your reference. For example, you can split, crop, add watermarks/effects, replace audio and adjust volume to get better output quality.
3) Hit the “Save as” button, you can keep the settings for next use by default.
4) Click the “Snapshot” button; you can capture the current picture you like with ease.